Carlion › Installation Guide

Installation Guide

Safety Precautions

Before starting installation, make sure the vehicle engine is off and the ignition is off. Disconnect the negative (-) terminal cable. Be careful when making electrical connections. Use necessary protective equipment.

Removing Old System

To remove your existing audio or multimedia system, first carefully remove the panel covers. Keep screws organized to avoid losing them. Take photos and note cable connections.

GL-300/500/700 Installation

For GL series multimedia system installation, the appropriate bracket must be attached to the vehicle console. Connect cable harnesses in the correct order. Check RCA cable connections. Make the screen mounting.

GV-F100 Installation

For GV-F100 front camera installation, the camera must be mounted on the vehicle's front windshield or bumper area. Carefully determine the cable route. Pass the video cable through the vehicle interior. Check connections.

DH Series Installation

For DH series screen installation, the appropriate adapter must be attached to the vehicle console. Connect cable harnesses according to color codes. Check HDMI and USB connections. Make screen settings.

Amplifier Installation

For amplifier installation, first determine the amplifier location. Connect the power cable from the battery to the amplifier. Connect the RCA signal cable from the multimedia system to the amplifier. Make speaker cable connections.